Ελληνικά


R7013 CNC ROUTER 

 

 

 

 

 

 

 

 

 

 

Standar Equipment

 

  • Firm metalic stracture 
  • Working area 7m x 1.2m
  • 2 servo motors at Υ axis 
  • 1 servo motor at Χ
  • 1 servo motor at Ζ
  • 8 bearings suport the bridge, 4 bearings at each side (be aware  that most machines use only 2 bearings at each side)
  • Double bed 
  • Centering system for X and Y axis
  • Automatic measyrement of the thickness of the material
  • Automatic neasuring Z axis zero point
  • Special system quarantees the perfect engage between rack and pinion 
  • All moving parts are covered by special items, limited need for meitenance 
  • Servo motors at all axis, 4hp each
  • servo with encoder 80.000ppr and 200.000ppr
  • Accurancy (via mathematic equasions) 0.00108mm and 0.000435mm (acording to encoder)
  • Repeatability 0,0009625mm
  • Accurancy measured with a digital instrument 0,05mm 
  • Smallest axis movement 0.001mm
  • Moving and operating speed 25m/min
  • Bearings at all axis 
  • All cables are protected by energy chains
  • Digital switches at all axis 
  • Special cables with reduced EMC noise 
  • Special covers at the end of the working area keep the dust away from the moving parts
  • Spindle with SKF bearings
  • Spindle power 6hp, 24.000rpm
  • Spindle is controled via inverter and keeps the speed steady even under pressure  
  • Spindle speed in controlled via the operating software  
  • Capable tool shank diameter 0.1mm to 20mm
  • Capable tool (endmill) diameter 0,1mm to 60mm 
  • Control made out of  ΑΒΒ electronics 
  • Vacuum system useing a dry operating vacuum pump of 2hp, limited need for maitenance 
  • vacuum system outputs  1000kg of holding force  
  • Special engaved vacuum table  
  • Embeded PC with a  19'' touch screen at a stand alone control tower 
  • machine can operate in  2D, 2,5D & 3D
  • The operating software inspects the machine at all times and outputs error messages displaying where the fault is   
  • The software generates  2D, 2,5D g-code out of DF files. the user can choose between : Drill, pocket, engrave, offset with tool radious compensation.
  • Speendle speed and cutting speed can be adjusted even when the machine is in operation
  • The software reads operating speeds and spindle speeds from the G-code
  • During operation the machine can be paused or stopped and then it can continue the operation from the same point 
  • Emergency buttons.
  • The machine can operate 7/24
  • Can operate in any material such as wood, plastics, metals, stones.
  • Low power consumption
  • Almost zero maitenanse needed 
  • Power 380V 3-phase
  • Weight 1800kg
  • operating cost including maitenance and electric power ~1 €/h

 

Optional Extras

 

  • Dust suction 
  • Special suction foot, it  locks and unlocks earry easy and quick so the tool change will be a matter of seconds
  • CAM software for 3D operations 
  • Spindle update up to 12Hp    

     

     

     

     

     Contact us for price

Custom Made Machines

Custom Made

 

 

 

 

 

 

 

 

more....